Back to Blog
How-to Guides 2026-11-15 JE3 Metal Works | Custom Metal Art For Your Home 0 views

How to Style a Fern Wall Plate in a Gallery Wall

How to Style a Fern Wall Plate in a Gallery Wall

Plan a gallery wall around a fern wall plate: pick a layout, mix frames, choose the right switch or outlet size, and hang it with the included hardware.

Start with the plate, then build the wall around it

A fern wall plate works best in a gallery wall when you treat it as the anchor rather than an afterthought. Decide where it goes first, then arrange frames and other pieces around its shape and finish. The Fern Wall Plate is made from 18-gauge steel with a powder coat finish, so it reads as a solid, low-profile accent rather than a fragile ceramic plate.

Because it is flat and reversible, you can install it with either side facing out. That gives you flexibility when you are matching it to the frames and hardware already on the wall.

What the Fern Wall Plate gives you to work with

  • Fern Wall Plate: Fabricated from 18-gauge steel with a powder coat finish A slim steel plate sits close to the wall, so it can share a gallery wall with frames without sticking out awkwardly.
    Fern Wall Plate
    Fern Wall Plate
  • Fern Wall Plate: The wall plate is perfectly flat and reversible; it can be installed with either side facing out You can flip it to suit the side of the wall you see, which helps when you are matching the plate to nearby frames and fixtures.
  • Fern Wall Plate: Mounting hardware is included You do not need to source separate plate hangers or screws for the plate itself.

Choose the right Fern Wall Plate size before you lay out the wall

The plate is a functional switch or outlet cover, so the layout only works if the size matches the box on your wall. The Fern Wall Plate comes in six configurations; check your existing cover before ordering.

  1. Single Toggle Light Switch: For a standard single light switch box.
  2. Single GFI Rocker Light Switch: For a single rocker-style switch, including GFI locations.
  3. Single Duplex Power Outlet: For a standard duplex outlet.
  4. Double Toggle Light Switch: For a two-toggle switch plate.
  5. Double Gang Rocker Light Switch: For a double-gang rocker setup.
  6. Quintuple Gang Rocker Light Switch: For a five-gang rocker bank, useful when the plate is part of a larger wall composition.

Build a gallery wall plate layout around the fern

Treat the plate as one element in a grid or cluster. A simple approach is to place it at eye level near the center of the arrangement, then balance it with frames of different sizes. Because the fern design is botanical, it pairs naturally with wood frames, muted prints, and other nature-inspired pieces.

Keep the spacing consistent between the plate and the frames. A flat steel plate can look crowded if it sits too close to a thick frame, so leave a little breathing room around it. If the plate covers a switch you use daily, keep the area directly around it clear so the switch stays easy to reach.

Mixing plates and frames without visual clutter

  • Repeat one finish: The Fern Wall Plate is available in Black. Repeating black in frame edges or small accents ties the plate into the wall.
  • Vary the shapes: Rectangular frames next to a flat plate create contrast; keep the overall outline balanced rather than stacking everything at one height.
  • Limit the number of focal points: One fern plate is enough for a small wall. On a larger wall, use it as a quiet accent rather than the busiest element.

Hang the plate with the included hardware

The Fern Wall Plate includes mounting hardware, so installation follows the same basic steps as replacing a standard wall plate. Turn off power at the breaker before removing the old cover, then install the new plate with the supplied hardware. The plate is reversible, so decide which side faces out before you tighten it down.

The catalog does not list a specific screw size or torque, so follow the hardware provided and avoid overtightening. If the plate does not sit flush, check that the box and wiring are clear behind it rather than forcing the plate against the wall.

Plate hanger tips for a flat steel wall plate

  • Use the supplied hardware: The Fern Wall Plate comes with mounting hardware; there is no need to buy a separate plate hanger.
  • Skip decorative plate stands: This is a functional switch plate, not a display plate, so it mounts to the wall box rather than sitting on a shelf.
  • Check the fit before decorating around it: Confirm the plate sits flat and the switch or outlet is usable before you finalize frame placement.

Keep the powder coat looking good

The powder coat finish is durable, but the supplied information does not include a specific cleaning routine. A soft, dry cloth is a reasonable default for dust, and you should avoid abrasive cleaners that could dull the finish. If you need manufacturer-specific care instructions, check the packaging or contact the maker rather than guessing.

Related Articles

Customer Service
Home
Products
Cart
Profile