How to Install a Single Wall Hook for Towels and Gear
By JE3 Metal Works | Custom Metal Art For Your Home | Published: 2026-10-20
Category: How-to Guides
Learn how to install a single wall hook for towels and gear with step-by-step instructions. Get tips for heavy-duty mounting on drywall and studs.
Quick answer
Choose a stud location or use a drywall anchor rated for the weight of your towels or gear, then mount your single wall hook with the included hardware.
Why stud mounting matters for heavy gear
If you plan to hang heavy items like a wet bathrobe, a tool belt, or a dog leash, mounting directly into a wall stud gives you the strongest hold. Drywall alone can crack or pull out under repeated weight. For lighter items like a single hand towel, a quality drywall anchor works fine.
The Bull Single Wall Hook and Goat Tying Single Wall Hook are made from 14-gauge steel and come with mounting hardware, so they are ready for either installation method. The Mule Single Wall Hook uses 12-gauge steel, which is slightly thicker, and also includes hardware.
Step-by-step installation guide
- 1. Choose the location and find a stud: Use a stud finder to locate a wall stud where you want the hook. If no stud is available, mark the spot and plan to use a drywall anchor rated for the weight you will hang. Common mistake: Skipping the stud finder and relying on drywall alone for heavy items. Always check for a stud first.
- 2. Mark and drill pilot holes: Hold the hook against the wall and mark the screw holes through the mounting plate. Drill pilot holes slightly smaller than the screws provided. For drywall anchors, drill a hole matching the anchor size. If you drill into a stud, use a drill bit slightly smaller than the screw to avoid splitting the wood.
- 3. Insert anchors if needed: Tap the drywall anchor into the pilot hole until it is flush with the wall surface. Do not use anchors when mounting into a stud. Common mistake: Using anchors in a stud. Anchors are only for hollow drywall.
- 4. Attach the hook and tighten screws: Position the hook over the holes and drive the screws through the mounting plate into the anchors or stud. Tighten firmly, but do not overtighten or strip the screw head. Overtightening can strip the screw or crack the powder coat finish. Stop when the hook feels snug.
- 5. Test the hook before loading: Give the hook a gentle tug to confirm it is secure. Then hang your towel or gear and check that the hook holds without wobbling. If the hook feels loose, remove it and check that the screws are fully seated or that the anchor is gripping the drywall.
Product facts
- Bull Single Wall Hook: Laser-cut from 14-gauge steel with a powder coat finish. The sturdy steel and durable finish mean this hook can handle daily use in a bathroom or entryway without bending or chipping.
Bull Single Wall Hook - Goat Tying Single Wall Hook: Mounting hardware included; design originates from hand-drawn artwork exclusive to JE3. You get everything needed for installation right in the box, and the unique design adds a decorative touch to a functional hook.
