Saddle Bronc Single Wall Hook: Where to Mount It

Start with the hook's supplied dimensions

The Saddle Bronc Single Wall Hook is a laser-cut 14-gauge steel hook with a powder coat finish. The supplied information gives the hook portion as 2” tall x 2” deep x 3⁄4” wide, and notes that the size of the main body varies by design. That hook-portion measurement is the practical starting point for placement: it tells you how far the hook projects from the wall and how much vertical room the hanging area needs.

The supplied information does not give an overall height or width for the main body, a weight capacity, or a recommended mounting height. Those are decision limits, not defects. Use the hook-portion dimensions to check clearance, then choose a height that suits the items you plan to hang and the people who will reach them.

What the catalog confirms

• Saddle Bronc Single Wall Hook: Laser-cut from 14-gauge steel with a powder coat finish. These are the supplied material and finish facts to use when deciding whether the hook suits an indoor hanging spot.

  

• Saddle Bronc Single Wall Hook: The hook portion is 2” tall x 2” deep x 3⁄4” wide; the main body size varies by design. The hook portion sets the projection and hanging space; the body size is not fixed in the supplied information, so check the design you receive.
• Saddle Bronc Single Wall Hook: Mounting hardware is included, and the hook is wall mounted. You do not need to source separate mounting hardware for the installation described in the catalog.

Choose a location before you drill

The catalog describes the hook as usable anywhere you need a convenient hanging place, and says it is perfect for coats and jackets and strong enough for use in the home or shop. That is broad guidance, not a room-by-room specification. For a western entryway hook, the natural fit is a spot where a coat, jacket or similar item needs a dedicated hanging place.

Before drilling, confirm three things: the wall area is clear of obstructions, the hook's 2” projection will not crowd a door swing or walkway, and the item you plan to hang will clear the floor. The supplied information does not state a load limit, so avoid treating the hook as a heavy-load anchor. If you need a specific weight rating or a particular mounting height for a code or accessibility requirement, that information is not confirmed in the supplied catalog.

How to install the Saddle Bronc Single Wall Hook

The catalog confirms the hook is wall mounted with mounting hardware included. It does not supply step-by-step drilling, anchor or fastener instructions, so the following sequence covers only the supported preparation and mounting decisions.

1. 1. Mark the hanging spot: Hold the hook against the wall at the height and position you want, using the 2” hook-portion projection to check clearance. Mark the mounting points through the hook's mounting holes.
2. 2. Check the wall surface: The supplied information does not specify wall types or anchors. Confirm what your wall is made of and whether the included hardware is appropriate for it before drilling.
3. 3. Mount with the included hardware: The catalog states mounting hardware is included. Follow the hardware's own guidance; the supplied product information does not provide torque, drill-bit size or anchor-selection instructions.
4. 4. Test with the intended item: Hang the coat or jacket you plan to store and check that it clears the floor and surrounding surfaces. Because no load limit is supplied, start with the light, everyday items the catalog names rather than heavy gear.

Placement trade-offs to weigh

• Entryway convenience vs. wall space: A western entryway hook works best where it is easy to reach on the way in or out. The 2” depth is the projection to account for when judging whether the spot feels crowded.
• Single hook vs. a row of hooks: This is a single hook, so it holds one hanging point. If several people need coat space, plan additional hooks or another storage solution.
• Home vs. shop: The catalog says the hook is strong enough for use in the home or shop. The shop setting may involve heavier items, but no load rating is supplied, so treat that statement as intended use rather than a tested capacity.
• Powder coat finish: The powder coat finish is a supplied feature. The catalog does not provide cleaning or care instructions, so avoid assuming a specific cleaner is approved.

What to confirm before you buy

The Saddle Bronc Single Wall Hook is available in Black, and the main body size varies by design. If the exact body dimensions matter for your wall space, confirm them before ordering, because the supplied information gives only the hook-portion size. The hand-drawn design is exclusive to JE3, and the hook is made in the USA.

If your plan depends on a specific mounting height, a weight capacity, a wall-type compatibility list or care instructions, those details are not confirmed in the supplied catalog. In that case, choose a location based on the hook-portion dimensions and the intended coat-or-jacket use, and treat any additional requirement as something to verify separately.