How to Install a Moose Towel Bar & Shelf Combo

By JE3 Metal Works | Custom Metal Art For Your Home | Published: 2026-10-22

Category: How-to Guides

Mount your Moose Towel Bar & Shelf securely with these step-by-step instructions. Learn tips for leveling, stud placement, and achieving a rustic bathroom look.

Quick Answer

Mount your Moose Towel Bar & Shelf in about 30 minutes using the included hardware and a few basic tools. Focus on finding a stud and keeping the shelf level for a secure, straight installation.

What You’ll Need Before Starting

Gather a stud finder, a level, a drill with drill bits, a pencil, and a screwdriver. The Moose Towel Bar & Shelf comes with mounting hardware, but having these tools ready will make the job smoother.

Choose a location that allows the towel bar to extend 18 inches and the shelf to sit level. Avoid placing it too close to a shower or tub where moisture might affect the powder coat finish over time.

Step-by-Step Installation Guide

Mark the Mounting Height: Hold the Moose Towel Bar & Shelf at your desired height (typically 48-52 inches above the floor for a towel bar). Use a level to check it’s straight, then mark the screw holes with a pencil. Common mistake: Skipping the level. Even a slight tilt will be noticeable with the shelf top.
Locate Wall Studs: Run a stud finder over your marks. Ideally, at least one screw should hit a stud for maximum support. If no stud aligns, use drywall anchors rated for at least 50 lbs. Checkpoint: If you use anchors, pre-drill pilot holes to avoid cracking the drywall.
Drill Pilot Holes: Drill pilot holes at your marks using a bit slightly smaller than the included screws. This prevents the steel mounting bracket from bending and makes screw insertion easier. Common mistake: Drilling too deep into a stud can weaken it. Stop once you feel the bit punch through the drywall.
Attach the Mounting Bracket: Line up the bracket with the pilot holes and screw it into place using the supplied hardware. Tighten until snug, but do not overtighten, which could strip the screw head or crack the bracket. Checkpoint: Verify the bracket is still level after tightening all screws.
Hang the Towel Bar & Shelf: Slide the Moose Towel Bar & Shelf onto the mounted bracket. It should click or settle into place. Give it a gentle tug to confirm it’s locked on. Common mistake: Forgetting to check that the moose artwork faces outward. Adjust before fully seating the unit.
Final Level Check and Test: Place a level on the shelf top. If it’s off, loosen the bracket screws slightly, adjust, and retighten. Hang a towel and place a small decorative item on the shelf to ensure stability. Checkpoint: Wait 24 hours before loading the shelf with heavy items to let the screws settle.

Product Spotlight

Moose Towel Bar & Shelf: Laser-cut from 14-gauge steel with a powder coat finish. This construction makes the combo durable and resistant to bathroom humidity, so it holds towels and small decor items without sagging or rusting.
Moose Towel Bar & Shelf