Barrel Race Towel Hooks: Organize Your Bathroom or Garage
By JE3 Metal Works | Custom Metal Art For Your Home | Published: 2026-10-23
Category: Product Reviews
Learn how to use a western utility hook to organize towels in your bathroom or gear in your garage. Step-by-step installation tips included.
Quick answer
The Barrel Race Utility / Towel Hook works as a single wall hook for towels in a rustic bathroom or for hanging gear in a garage. Follow these steps to install it securely on drywall or wood.
Why this hook works for both bathroom and garage
This laser-cut steel hook has a 2-inch tall hook portion that fits towels, robes, or lightweight garage gear like shop towels and extension cords. The powder coat finish resists moisture in a bathroom and holds up to dust and dirt in a garage. The main body design varies by color option, so you can match your decor.
One trade-off: the hook depth is only 2 inches, so bulky winter coats or heavy tool belts may not fit well. It is best for items you grab frequently rather than long-term heavy storage.
How to install your barrel race towel hook
- Choose your location and mark the spot: Hold the hook against the wall at your desired height. For a towel hook, place it 48–52 inches from the floor. For a garage hook, choose a spot near your workbench or pegboard. Use a pencil to mark the screw holes through the mounting plate. Make sure the wall is clear of pipes or wires behind the drywall before drilling.
- Drill pilot holes and insert anchors if needed: Use a drill bit slightly smaller than the included screws. If you are mounting into drywall without a stud, insert wall anchors first. For wood studs or solid wood, you can skip the anchors. Skipping anchors on drywall will cause the hook to pull out under weight.
- Secure the hook with the included hardware: Align the hook over the pilot holes and drive the screws through the mounting plate into the wall. Tighten until the hook feels firm against the wall. Do not overtighten, as this can strip the screw head or crack the powder coat. Use a manual screwdriver for final tightening to avoid stripping the screws.
- Test the hook before regular use: Gently pull down on the hook with your hand to confirm it is secure. Then hang a towel or light item to check that the hook holds without wobbling. If the hook wobbles, remove it and check that the screws are fully seated or add a larger anchor.
Product details
- Barrel Race Utility / Towel Hooks: Laser-cut from 14-gauge steel with a powder coat finish. The thick steel and durable coating mean this hook can handle daily use in humid or dusty spaces without rusting or bending.
Barrel Race Utility / Towel Hooks
