العودة إلى المدونة
أدلة إرشادية 2026-11-21 JE3 Metal Works | Custom Metal Art For Your Home 0 مشاهدة

How to Mount a Team Roping Coat & Key Hook

How to Mount a Team Roping Coat & Key Hook

Learn how to mount the Team Roping Coat & Key Hook from JE3 Metal Works. Step-by-step guide with hardware details and care tips for your western entryway.

What You Get with the Team Roping Coat & Key Hook

The Team Roping Coat & Key Hook is a wall-mounted metal art piece designed to organize your entryway while adding western character. It is laser-cut from 12-gauge steel, finished with a durable powder coat, and measures 34.54" wide by 17.73" tall by 3" deep. The hook comes with mounting hardware included, and the hole spacing is 16" for a stud mount. Each piece is hand-drawn and made in the USA.

Key Details from the Catalog

  • Team Roping Coat & Key Hook: Material: Laser-cut from 12-gauge steel 12-gauge steel is thick and sturdy, so the hook can hold multiple coats and keys without bending.
    Team Roping Coat & Key Hook
    Team Roping Coat & Key Hook
  • Team Roping Coat & Key Hook: Size: 34.54" wide x 17.73" tall x 3" deep This is a large hook. Before mounting, measure your wall space to ensure it fits without crowding other fixtures.
  • Team Roping Coat & Key Hook: Finish: Powder coat finish The powder coat protects against scratches and rust, making it suitable for high-traffic areas like mudrooms and entryways.
  • Team Roping Coat & Key Hook: Hardware: Mounting hardware included You do not need to buy extra screws or anchors. The included hardware is designed for the hook's weight and mounting pattern.
  • Team Roping Coat & Key Hook: The coat hooks come with 16” hole spacing for a stud mount. The hook is designed to be mounted directly into wall studs spaced 16" apart, which is standard in most homes. This provides a secure, load-bearing installation.

Mounting Your Team Roping Coat & Key Hook

The hook is designed for a stud mount with 16" hole spacing. Follow these steps for a secure installation.

  1. 1. Locate wall studs: Use a stud finder to mark the centers of two studs that are 16" apart. The hook's mounting holes are spaced exactly 16" apart to align with these studs.
  2. 2. Mark the mounting holes: Hold the hook against the wall at your desired height. Use a pencil to mark the two mounting hole locations through the hook's keyhole slots. Make sure the hook is level.
  3. 3. Drill pilot holes: At each marked location, drill a pilot hole into the stud. Use a drill bit slightly smaller than the included screws. Pilot holes prevent the wood from splitting and make screw insertion easier.
  4. 4. Attach the hook: Align the hook's mounting holes with the pilot holes. Insert the included screws and tighten them with a screwdriver or drill until the hook is snug against the wall. Do not overtighten, as this could strip the threads or damage the powder coat.
  5. 5. Check stability: Gently pull on the hook to ensure it is firmly attached. If it moves, verify that the screws are fully engaged in the studs.

Caring for the Powder Coat Finish

The powder coat finish is durable, but a little care keeps it looking new. Wipe the hook occasionally with a soft, damp cloth to remove dust. Avoid abrasive cleaners or scouring pads, which can scratch the finish. If the hook is in a humid area like a mudroom, periodic dusting is enough to maintain its appearance.

Where to Use Your Team Roping Hook

With its western design and sturdy steel construction, the Team Roping Coat & Key Hook works well in an entryway, mudroom, or even a home office with a ranch theme. The 16" stud spacing requirement means it is best mounted on a wall with standard stud framing. If your wall does not have studs at 16" centers, you may need to use wall anchors rated for the hook's weight, though the manufacturer's included hardware is intended for stud mounting.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي